Porcelain tiles and its different varieties

Porcelain tiles are one of the best home renovation options which can be used for interior and exterior d├ęcor. It is one of the most practical choices as well. These tiles come in a variety of colours, textures, and sizes.

There are two types of porcelain tiles, wide: through-bodied and glazed. These tiles also come in three varieties: glazed, polished or unglazed finish, with glazed being the most common porcelain variety.

Through-Bodied Porcelain Tile

  • Through-bodied porcelain tile means that the tile’s colour and texture is uniform throughout the tile, not just along the surface. These tiles are made from a clay, sand and mineral mixture that is shaped and then fired at high temperatures. Through-bodied tile is extremely strong, durable and able to withstand freezing temperatures. Unless they have a polished finish, these tiles are slip-resistant and scratch and chip resistant.
  • Through-bodied porcelain tiles in Sydney
  • is ideal for commercial locations because they withstand heavy foot traffic. The colour won’t fade because there is no glaze and if a tile does chip, the colour is the same underneath, making the chip less noticeable. These tiles can also be installed in homes as flooring, on walls or countertops, and in wet locations such as the kitchen or bathroom.

Glazed Porcelain Tile

  • Glazed porcelain tiles are made from porcelain, fired in a kiln and has a glazed finish. The glaze is usually tinted and is a glass wear layer that is baked into the surface and gives the tile its final colour.
  • If the glaze is then polished, the tile must be sealed after installation to make it non-porous. The glaze finish makes this tile stain-resistant and has more colour and texture options.
  • Glazed porcelain tiles in Sydney are the most common variety chosen by homeowners because of durability and the variety of colors and textures available at tile stores.
  • Glazed tiles can appear glossy or matte and are extremely durable and highly stain-proof. These tiles can mimic the appearance of natural stones like granite, limestone and slate, as well as metals like aluminium and brass. These machine-made tiles come in all shapes and sizes and can be used on the wall, floor or as a countertop.

All types of porcelain tiles in Sydney are more durable and dense than ceramic tile and require less maintenance than natural stone and hardwood. As porcelain tiles are very durable, they are used in making hard walls and floorings. However, they are the best option for constructing walls, as they do not absorb stains because of being non-porous. As it is a bit slippery, hence while using for floors, the porcelain tiles should have matt finish, or anti-skid to have a strong grip while walking. Glazed porcelain is more difficult to scratch and stain and resists moisture and frost. It is an attractive option for high-traffic areas and is easy to keep clean. It doesn’t need to be polished or waxed and only needs sealing if a polished or unglazed tile was installed.

Back To Top